0
home

PU Hydrocyclone

home
PU Hydrocyclone
PU Hydrocyclone
Price And Quantity
  • Piece/Pieces
  • 5
  • Piece/Pieces
  • 100000 MXN ($)
  • 10000.00 - 100000.00 MXN ($)
Product Specifications
  • Industrial Grade
  • Other
  • Solid
  • PU
    Product Description
    We manufature  Hydrocyclones as per customer requirement A hydrocyclone is a device to classifyseparate or sort particles in a liquid suspension based on the densities of the particles A hydrocyclone may be used to separate solids from liquids or to separate liquids of different density

    A hydrocyclone will normally have a cylindrical section at the top where liquid is being fed  and a base The angle and hence length of the conical section plays a role in determining operating characteristics

    A hydrocyclone has two exits on the axis the smaller on the bottom underflow or reject and a larger at the top overflow or accept The underflow is generally the denser or thicker fraction while the overflow is the lighter or more fluid fraction

    Internally centrifugal force is countered by the resistance of the liquid with the effect that larger or denser particles are transported to the wall for eventual exit at the reject side with a limited amount of liquid whilst the finer or less dense particles remain in the liquid and exit at the overflow side through a tube extending slightly into the body of the cyclone at the center

    Forward hydrocyclones remove particles that are denser than the surrounding fluid while reverse hydrocyclones remove particles that are less dense than the surrounding fluid In a reverse hydrocyclone the overflow is at the apex and the underflow at the base There are also parallel flow hydrocyclones where both the accept and reject are removed at the apex Parallelflow hydrocyclones remove particles that are lighter than the surround fluid

    Orithane cyclone distributors

    Require 3 connections ie feed overflow discharge and underflow discharge Compact design to reduce floor area requirement while providing sufficient room for access and maintenance Isolation valves provided at shoulder height with sufficient access for easy operation Underflow landlaunder installed at floor level for visual inspection of spigot discharge and easy access for maintenance

    Feed distributor

    Radial or inline to ensure equal solids and liquid distribution to each cyclone for equal cyclone performance 2 to 62 outlets available All internal surface lined with an abrasion resistant wear liner Replaceable sole polyurethane wear pad to protect wear liner and increase operating life Supplied with pressure gauge to monitor cyclone operation

    Cyclones

    Designed to accommodate cyclones from 40mm to 900mm isolation valves provided to enable cyclones to be isolated for maintenance or operational reasons

    Overflow tanklauder

    Individual cyclone overflow discharge into a common overflow Overflow tank is lined with a suitable abrasion resistant liner An outlet of sufficient diameter is provided to enable maximum slurry flow rate to discharge under gravity A removable splash cover is provided to minimize splashingspray

    Underflow tanklaunder

    Individual cyclone spigots discharge into a common underflow launder Underflow tank is lined with a suitable abrasion resistant liner ie urethane Natural rubber or ceramics A large outlet is provided and the base is angled between 10 and 45 degrees to ensure the dense spigot product can discharge under gravity A removable splash cover can be provide to minimize any spraysplashing present

    The unique scrolled evolute inlet design

    The heart of the orithane dense medium cyclone

    Through extensive testing and simulations Orithane process equipment has proven that the scrolled evolute inlet design has a higher capacity when compared to other inlet designs The scrolled evaluate inlet design substantially reduces vortex finder wear reducing operating costs and maintaining cyclone efficiency

    Material of construction

    Cyclones are available in a wide range of materials depending on cyclone diameter top size and material being treated

    Available materials are

    Polyurethane

    A special abrasion resistant polyurethane which under certain conditions can give three times more life than rubber

    Cast iron

    A 27%  high chrome cast iron which provides excellent abrasion resistance for most applications

    Silicon carbide

    Liners manufactured from nitride bonded silicon carbide which provides superior abrasion resistance for softer and smaller particle applications

    Alumina

    Engineered alumina tiles with 94 alumina which is suited to coarse particle high wearing applications

    Hybrid alumina and cast iron

    Used in alumina lined cyclones where tramp metal is present The cone sections are supplied in high chrome cast iron which is better suited to handling tramp metal

    Highefficiency inlet designs

    The heart of the orithane cyclone range

    Through extension testing and simulations Orithane process equipments has proven that both the scrolled evolute and ribbon inlet designs have a higher capacity when compared to other inlet designs These designs substantially reduce vortex finder wear thereby reducing operating costs whilst maximizing cyclone efficiency

    General features

    Lightweight overflow elbow

    Overflow elbows are made from an abrasionresistant polymer That is lightweight Requires no corrosion protection and is costeffective a rubberurethane sleeve is fitted to reduce wear at the vortex finder discharge

    Vortex finders

    The scrolled evolute and ribbon inlet designs reduce vortex finder wear to the degree that polyurethane or rubber lined vortex finders can be used costeffectively

    Loose liners

    All wetter surface are lined with 15 or 25mm thick loose replaceable rubber liners Which have up to three times more life than conventional liners This reduces operating costs Maintenance and stock holdings alternative liners Such as polyurethane and silicon carbides are available For extremely abrasive applications housings lined with 25mm alumina tiles can be supplied

    Weep holes prevent damage to housings

    Outer housings are fitted with weep holes located in the highest wear areas Slurry dripping from the weep holes gives an early indication that the liner needs replacing Preventing housing wear

    HC and HR cyclones incorporate mild steel shell housings While PC cyclones incorporate lightweight Rustresistant fibrereinforced composite housings

    Spigot

    The spigot is housed in a light weight holder The design of which enables easy inspection or replacement of the spigot Inserts are available in polyurethane or silicon carbide

    Cyclone distributors

    We offer distributors for larger multiple cyclone operations These assembles have been designed to ensure optimum cyclone operation and are extremely compact
    Trade Information
    • 100 Per Month
    • 1 Months
    • All India
    Related Products
    Hydro Cyclones with Urethanes


    Send Inquiry
    Hydrocyclones Polyurethane


    Send Inquiry
    Hydrocyclones Filter


    Send Inquiry
    Hydro Cyclones -  Metal Shells


    Send Inquiry
    Polyurethane Hydro Cyclone


    Send Inquiry
    right arrow
    left arrow
    Contact Us

    P-204/10, PHASE - II, SECTOR -III, IDA CHERLAPALLY, Hyderabad, Telangana, 500051, India
    Phone :+918037402894